LOG IN| 1 | Institution Name | Adhiyamaan College of Engineering |
| Project | “A research on fabrication and testing of natural fiber (LUFFA SPONGE) composites with infusion of Tio2, A replacement for glass fibre to showcase the research on the design and performance analysis of centrifugal pump impeller made of polymer material (Polyphenylene Sulphide)” | |
| Contact Person | Prof. Channakaiah (Prof & HOD, Mech Engg) | |
| Email Contact No |
mechace@gmail.com, hod_mech@adhiyamaan.ac.in
04344-261010 |
|
| 2 | Institution Name | Amrita School of Engineering |
| Project | Waste Segregation System using Automated Garbage Bin | |
| Contact Person | Prof. Prashanth B N (Associate Prof.) | |
| Email Contact No |
bn_prashanth@blr.amrita.edu
09844118915 |
|
| 3 | Institution Name | Amrita Vishwa Vidyapeetham |
| Project | Innovative Anti-Bourdon Tube Pressure Gauge for Manufacturing Industries, Cost Effective Dimensional and Form Tester, A Novel Multi-fingered Robotic Hand for Manufacturing & Prosthetic Applications, Subsurface Defect Detection System for Semiconductor & Automobile | |
| Contact Person | Dr. Ganesha Udupa (Professor) | |
| Email Contact No |
ganesh@am.amrita.edu
09447490902 |
|
| 4 | Institution Name | BMS College of Engineering |
| Project | Research on Vibrations, Metal Matrix Composites, Testing of Antifriction, Bearings & Air foil and performance Study of Hybrid Bearings, Nano Technology | |
| Contact Person | Dr P Martin Jebaraj (Director R & D) | |
| Email Contact No |
kmartin8181@yahoo.co.in
09880339507 |
|
| 5 | Institution Name | IIT - Bombay (Metallurgy Department) |
| Project | Steel Centre theme - Its Activities, Steel R&D, Metal Forming R&D | |
| Contact Person | Prof. K Narasimhan (Professor) | |
| Email Contact No |
nara@iitb.ac.in
09869264161 |
|
| 6 | Institution Name | IIT - Bombay, (Machine Tool Laboratory and NCAIR) |
| Project | Flexible Re-Configurable laser manufacturing system, Electro - Chemical buffing, Nano Polishing jointly with BARC, Incremental Sheet Forming – Component, Cryogenics Machining, Micro-machining | |
| Contact Person | Ashish Kumar Saxena | |
| Email Contact No |
ashishsaxsena@iitb.ac.in
07498702083 |
|
| 7 | Institution Name | IIT Madras (Mechanical Engineering Department) |
| Project | Concepts of Micro Machining process like Micro Milling, Micro Drilling and Micro Turning | |
| Contact Person | Dr. G.L. Samuel (Associate Prof.) | |
| Email Contact No |
samuelgl@iitm.ac.in
09444468251 |
|
| 8 | Institution Name | IIT Madras (Manufacturing Engg) |
| Project | Design of a tool holder to accommodate the unused edges of the through away cutting inserts | |
| Contact Person | Mr. V.Sivaraman (Research Scholar) | |
| Email Contact No |
vsivaraman@sify.com | |
| 9 | Institution Name | KLS Gogte Institute of Technology |
| Project | Concept Design & Fabrication of Loading Unit, Data Acquisition system for Hydraulic Systems, Analysis of Direct Extrusion Process, and Finite Element Analysis based Comparative Analysis of Tube Drawing Process, Design and Fabrication of Bus Bar Bending Hydraulic Press | |
| Contact Person | Mr. S V Chitnis (Associate Prof.) | |
| Email Contact No |
svchitnis@git.edu
09480427504 |
|
| 10 | Institution Name | New Horizon College of Engineering |
| Project | To enhance the surface hardness and corrosive resistance of material used in Aeronautical and Automobile applications, Measurement and Relieving of Residual Stresses from Coated Sheets, Numerical and computational modelling of Sheet Necking | |
| Contact Person | Dr. M S Ganesha Prasad (Professor & HOD) | |
| Email Contact No |
msgprasad@gmail.com
09886921136 |
|
| 11 | Institution Name | NMAM Institute of Technology |
| Project | Development of Micro-Electro-Discharge Machine (Micro-EDM) with Piezoactuated tool feed system, Development of Tool Based Micro Milling / Micro Drilling machine with Piezoactuated work piece feeding system, Experimental Investigations on Active vibration isolation using piezoelectric actuators, Condition Monitoring using vibration signal analysis | |
| Contact Person | Dr. Muralidhara (Professor) | |
| Email Contact No |
principal_nmamit@nitte.edu.in
08258-251264 |
|
| 12 | Institution Name | Padmasri Dr. B V Raju Institute of Technology |
| Project | Manufacturing of Brass Casting Using 2 stage parabolic Concentrating Solar Collector | |
| Contact Person | Dr. Murali Krishna Vemula (HOD-Mechanical) Mr. Paruchuri Satish Chandra (Professor) | |
| Email Contact No |
muralikrishna.vemula@bvrit.ac.in
satishchandra.p@srivishnu.edu.in
09949485552 |
|
| 13 | Institution Name | PES Institute of Technology |
| Project | R&D capabilities in Metal Forming-In particular the following are the focus area Hot Extrusion of Aluminium & their Composites Cold Forging, Tribological Coatings for Metal Forming Tooling Rapid Prototyping | |
| Contact Person | Mr. Sangamesh M (Assistant Professor) | |
| Email Contact No |
sangameshm@pes.edu
09480114530 |
|
| 14 | Institution Name | PSG College of Technology, (Robotics & Automation Engg) |
| Project | Experimental Study of Dynamic Characteristics of Fabricated Mineral Cast Lathe Bed, Design & Development of an Open CNC Controller Based on Linux | |
| Contact Person | Dr. B Vinod (HOD - Robotics & Automation Engg) | |
| Email Contact No |
bvinod@rae.psgtech.ac.in
09843042223 |
|
| 15 | Institution Name | PSG College of Technology, (Mechanical Engineering) |
| Project | Design & Analysis, Sensor Interfacing, Machine Tool Structures, Rapid Prototyping, Rapid Tooling's & Reverse Engineering | |
| Contact Person | Mr. J. Arul Regan (Professor) | |
| Email Contact No |
arulregan2000@gmail.com
09843023673 |
|
| 16 | Institution Name | R.V. College of Engineering |
| Project | Design & Development of Electro-Magnetic Field Assisted Sintering System | |
| Contact Person | Prof. M.S. Krupashankara (Professor) | |
| Email Contact No |
krupashankara@rvce.edu.in
09740093936 |
|
| 17 | Institution Name | Rajalakshmi College of Engineering |
| Project | Quality inspection, using Machine Vision Technology, of Dimensional Accuracy Verification, Surface Inspection for Scratch, Dent, Blow Holes and other Defects | |
| Contact Person | Mr. S Sathiyamoorthy (Ass. Professor) | |
| Email Contact No |
sathiyamano@gmail.com
09600560469 |
|
| 18 | Institution Name | Sambhram Institute of Technology |
| Project | Surface Modification by Novel Technique of Kinetic Spraying, Metal Sponge - A New Generation Material, SPD - The Route for U F G size & Severe Plastic Deformation (SPD) | |
| Contact Person | Dr. H G Chandrakanth (Principal) | |
| Email Contact No |
sait.smbhram@gmail.com
080-23643618 |
|
| 19 | Institution Name | SASTRA University |
| Project | Experimental investigation on enhancement of Mechanical properties of powder Metallurgy specimens through equal channel angular pressing, Comparative study for finding the optimum channel angle, Evaluation of Mechanical and water absorption behaviour of natural & Glass fiber reinforced hybrid composites, Modelling & Investigation on aluminium preforms processed through equichannel angular pressing & Extrusion | |
| Contact Person | Dr. S. Pugazhenthi (Dean) | |
| Email Contact No |
pugazhenthi@mech.sastra.edu
4362-304118 |
|
| 20 | Institution Name | Sri Chandrasekharendra Saraswathi Viswa Mahavidyalaya |
| Project | Research in Welding | |
| Contact Person | Prof. S. Vijaya Bhaskar (Associate Prof.) | |
| Email Contact No |
vijaybhaskar@kanchiuniv.ac.in
09884447669 |
|
| 21 | Institution Name | Sri Krishna College of Engineering & Technology |
| Project | Metal Property improvement by means of the following emerging & advanced process like, Shot Peening & its advances like Ricochet Peening, Thixo Forming Process | |
| Contact Person | Dr. A Ramesh (Professor & HOD) | |
| Email Contact No |
ramesh@skcet.ac.in
09363140941 |
|
| 22 | Institution Name | T. John Institute of Technology |
| Project | Direct Processing of Long Glass Flore Reinforced thermo Plastic Composite (LFTRTP), Direct processing of Nano filled Long glass fiber reinforced thermo plastic composites, Direct Extrusion compression Moulding of Long Natural fiber reinforced thermoplastic composites and Characterizations | |
| Contact Person | Dr. G P Prabhukumar (Dean Academics) | |
| Email Contact No |
gppkumar@tjohngroup.com
09448178136 |
|
| 23 | Institution Name | University of Strathclyde, UK |
| Project | Punch tool development and Testing, Forming Press systems and Punch Development, Reverse Engineering | |
| Contact Person | Mr. Ashutosh Khanna (Research Scholar) | |
| Email Contact No |
ashutosh.khanna@strath.ac.uk
08989005520 |
|
| 24 | Institution Name | IIT - Bombay, (Treelabs) |
| Project | Desktop Induction Melting Furnace, Levitation Melting Apparatus | |
| Contact Person | Prof Dipankar (Research Scientists) | |
| Email Contact No |
dipankar@treelabs.org
09158 366 266 |
